Just tried to connect to the project with a machine running Windows 08 Server. The first WU ran about 30 seconds and mm_sbcl.exe stopped (see message below), and it did the usual showing the WU 100% complete, which I expected as has happened with each new client I\'ve connected. The second WU ran about 10 minutes which is also normal, and usually after that one starts, I can enable the others. Well at the end of the 10 minutes I get the popup message:

mm_sbcl.exe has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.

If I click Close Program, the WU immediately goes to 100% and gives a validate error again. If I don\'t do anything, and just leave the error message on the screen, the WU happily crunches along.

I detached from the project, and attached again with the same result.

I am going to bed now, but will leave it running without closing the popups (and with it the mm_sbcl.exe file), and see if the WU\'s validate properly tonight. Despite the error messages, if I don\'t let windows close the file, they seem to be progressing along and crunching.


____________

scratch that, as I\'m sitting here watching before turning it off for the night, If I don\'t choose close program... the progress indicator shows
2.372
2.373
2.374
2.375
and immediately loops back starting over at 2.372

just going in a little loop not going anywhere.

I will play with it some more tomorrow if I have time, but will have to leave it on a different project for tonight.

____________

scratch that, as I\'m sitting here watching before turning it off for the night, If I don\'t choose close program... the progress indicator shows
2.372
2.373
2.374
2.375
and immediately loops back starting over at 2.372

just going in a little loop not going anywhere.

I will play with it some more tomorrow if I have time, but will have to leave it on a different project for tonight.

scratch that, as I\'m sitting here watching before turning it off for the night, If I don\'t choose close program... the progress indicator shows
2.372
2.373
2.374
2.375
and immediately loops back starting over at 2.372

just going in a little loop not going anywhere.

I will play with it some more tomorrow if I have time, but will have to leave it on a different project for tonight.

Did it ever continue?
I suspect it is the same problem as this bad percent done estimate at the beginning of a work unit

--Jack

Hmm... still no luck with this machine.
If I get time this weekend I will throw a better debugger on it and see if I can get more detailed info. The one thing I did find interesting is that there were these two lines:
c:\\users\\jack\\desktop\\mm\\boinc\\api\\boinc_api.c
and
c:\\users\\jack\\desktop\\mm\\boinc\\lib\\parse.c



<core_client_version>5.10.28</core_client_version>
<![CDATA[
<message>
- exit code -1073741819 (0xc0000005)
</message>
<stderr_txt>
ACTR: boinc_init_options complete
ACTR: boinc_get_init_data(actr_aid) complete
ACTR: Trace 1
ACTR: Trace 2
ACTR: Trace 3
ACTR: Trace 4
ACTR: Trace 5
ACTR: Trace 6
ACTR: Trace 7
ACTR: Trace 8
ACTR: Trace 9
ACTR: Trace 10 -- Lisp Running
ACTR: Trace 11 -- Watchdog Running (if Win32)
app error running lisp: 0xc0000005
called boinc_finish


**********
**********

Memory Leaks Detected!!!

Memory Statistics:
0 bytes in 0 Free Blocks.
1757 bytes in 6 Normal Blocks.
6499 bytes in 11 CRT Blocks.
0 bytes in 0 Ignore Blocks.
0 bytes in 0 Client Blocks.
Largest number used: 222419 bytes.
Total allocations: 1250191 bytes.

Dumping objects ->
{79} normal block at 0x01A03E40, 32 bytes long.
Data: <preparing-actr6v> 70 72 65 70 61 72 69 6E 67 2D 61 63 74 72 36 76
{63} normal block at 0x01A037A0, 1539 bytes long.
Data: <pvtnm-task.lisp > 70 76 74 6E 6D 2D 74 61 73 6B 2E 6C 69 73 70 00
{58} normal block at 0x01A030B8, 89 bytes long.
Data: < <color_scheme>D> 0A 3C 63 6F 6C 6F 72 5F 73 63 68 65 6D 65 3E 44
c:\\users\\jack\\desktop\\mm\\boinc\\api\\boinc_api.c(178) : {56} normal block at 0x01A01508, 4 bytes long.
Data: < 3 > 00 00 33 00
c:\\users\\jack\\desktop\\mm\\boinc\\lib\\parse.c(142) : {55} normal block at 0x01A03EA8, 89 bytes long.
Data: < <color_scheme>D> 0A 3C 63 6F 6C 6F 72 5F 73 63 68 65 6D 65 3E 44
{48} normal block at 0x01A01490, 4 bytes long.
Data: < *� > 20 2A A0 01
Object dump complete.


</stderr_txt>
]]>
____________

Well it seems, that the problem still exists. Just got several errors. Windows 2008 Eventlog says:

German Message:
Fehlerhafte Anwendung mm_sbcl.exe, Version 0.0.0.0, Zeitstempel 0x47a4b4a8, fehlerhaftes Modul unknown, Version 0.0.0.0, Zeitstempel 0x00000000, Ausnahmecode 0xc0000005, Fehleroffset 0x092a0f25, Prozess-ID 0xe6c, Anwendungsstartzeit 01c8f8a282e403b3.

Translated it will be:
Application with Error mm_sbcl.exe, Version 0.0.0.0, Timestamp 0x47a4b4a8, errornous Modul unknown, Version 0.0.0.0, Timestamp 0x00000000, Exceptioncode 0xc0000005, Erroroffset 0x092a0f25, Process-ID 0xe6c, Applicationstarttime 01c8f8a282e403b3.

Errors in Workitem-Log can be seen at:
Task-Details

The box works fine with other projects (e.g. POEM, SIMAP). Windows 64-Bit patch is applied. Current Boinc-Version is 6.2.14 for windows_x86_64.

Is there someone out there who can help me? The reported memory leak cannot be the problem because there are 4 GB free memory (of 16 total).

Thanx and Greetings
Kai